Home > Manuals & Information > FAQ (Frequently Asked Questions) > How do I adjust the 2B-0201R Water Spin-Spray Pump cone?

How do I adjust the 2B-0201R Water Spin-Spray Pump cone?

Remove the 2B-0209R Outer cover hood.

You can look down the motor to where the end of the 2B-0201R Water Spin-Spray Pump cone goes into the water pan. The end of the cone should be 3/8" up from the bottom of the water pan.

To adjust the height of the cone, loosen the 3 Pan head screws & nuts.
Adjust the whole motor, fan blade & spin spray cone assembly up or down so the end of the cone is 3/8" up from the bottom of the water pan. The end of the cone should be emerged in the 1" high of water controlled by the 2B-1006R New Float Valve assembly